| dc.identifier.citation | Anonim, 2015, Keruing, www.wikipedia.com/keruing Ardiansyah R., 2010, Penggunaan Kayu Kampung, https://ronymedia.wordpress.com/2010/05/19/penggunaan-kayu-kampung/ Asyraaf, 2016, 16 Jenis Kayu Indonesia yang Perlu Kita Ketahui, https://asyraafahmadi.com/2016/07/08/material-kayu/ Awaludin A, 2005, Dasar-dasar Perencanaan Sambungan Kayu, Jurusan Teknik Sipil, Fakultas Teknik, Universitas Gadjah Mada, Yogjakarta. Badan Penelitian dan Pengembangan Departemen Pekerjaan Umum, 1994, Metode Pengujian Kuat Geser Kayu di Laboratorium, SNI 03-3400-1994, Penerbit Dewan Standarisasi Nasional, Jakarta. Badan Penelitian dan Pengembangan Departemen Pekerjaan Umum, 1994, Metode Pengujian Kuat Tarik Kayu di Laboratorium, SNI 03-3399-1994, Penerbit Dewan Standarisasi Nasional, Jakarta. Badan Penelitian dan Pengembangan Departemen Pekerjaan Umum, 1995, Metode Pengujian Kuat Lentur Kayu di Laboratorium, SNI 03-3959-1995, Penerbit Dewan Standarisasi Nasional, Jakarta. Badan Penelitian dan Pengembangan Departemen Pekerjaan Umum, 1995, Metode Pengujian Kuat Tekan Kayu di Laboratorium, SNI 03-3958-1995, Penerbit Dewan Standarisasi Nasional, Jakarta. Badan Penelitian dan Pengembangan Departemen Pekerjaan Umum, 2002, Metode Pengujian Berat Jenis Batang Kayu dan Kayu Struktur Bangunan, SNI 03-6848-2002, Penerbit Dewan Standarisasi Nasional, Jakarta. Badan Penelitian dan Pengembangan Departemen Pekerjaan Umum, 2013, Spesifikasi Desain untuk Kontruksi Kayu, SNI 03-7973-2013, Penerbit Dewan Standarisasi Nasional, Jakarta. Chauf K.A, 2005, Karakteristik Mekanik Kayu Kamper sebagi Bahan Konstruksi, Universitas Tadulako, Palu. Hunggurami dkk, 2016, Identifikasi Kuat Acuan Terhadap Jenis Kayu yang Diperdagangkan di Kota Kupang Berdasarkan SNI 7973:2013, Fakultas Teknik FST Undana, Kupang. Prasetyo D.D., 2011, Signifikasi Modulus Elastisitas Kayu Meranti, Mahoni, Bangkirai yang ada di Pasaran dengan SNI 2002, Fakultas Teknik Universitas Muhammadiyah Surakarta, Surakarta. Rosyid S.N.P, 2016, Perbandingan Kekuatan Geser dan Lentur Balok Bambu Laminasi dengan Kayu, Fakultas Teknik Universitas Muhammadiyah Surakarta, Surakarta. | id_ID |
| dc.description.abstract | Wood is one of Indonesia's natural resources which is a construction element that is easily accessible and available in relatively large quantities. In the construction section, wood is widely used in every function of the building, from preparation to finishing. The research this time aims to determine the strength / quality value of whole wood test results in the laboratory with wood quality based on SNI 2847-2002 and SNI 7973-2013. Types of tests carried out include parallel tensile strength testing, compressive strength parallel to fibers, flexural strength and shear strength. The test objects for each test were 3 pieces with 5 kinds of wood. The wood is Sengon, Bangkirai, Kruwing, Kamper, and Jackfruit from Solo Raya. The results of mechanical testing in the laboratory are compared with the SNI 2847-2002 analysis starting from 14.48% to 87.07%, and with SNI 7973-2013 analysis from 5.30% to 26.39%. From these results provide knowledge that the use of SNI 7973-2013 analysis is closer to the results of mechanical testing in the laboratory than the use of SNI 2847-2002 analysis. | id_ID |
