| dc.identifier.citation | Anonim. (2010). Manufacturer of Screw Pumps and Small Hydro Power Plants, http://www.simul.cz/dokumenty/prezentace_ hydro_2010.pdf Arismunandar, W. (1997), Penggerak Mula Turbin, ITB, Bandung Dietzel, F.(1996). Alih Bahasa Dakso Sriyono, Turbin, Pompa, dan Kompresor, Erlangga, Jakarta. Havendri, A. dan Arnif, I. (2010). “Kaji Eksperimental Penentuan Sudut Ulir Optimum pada Turbin Ulir untuk Data Perancangan Turbin Ulir pada Pusat Listrik Tenaga Mikrohidro (PLTMh) dengan Head Rendah.” Seminar Nasional Tahunan Teknik Mesin (SNTTM) ke-9, Palembang. Leclerc, M., (2007), A New Turbine Low Head Profitable Harnessing of Verry Low Head Applications, MJ2 Technologies, France. Munson, B. R., Young, D. F., Okiishi, T. H. (2005). Mekanika Fluida Jilid 2, Erlangga, Jakarta. Paish, O. (2009). Small-Scale Hydro Feasibility Study, Final Report Part C: Technology Review, Nidderdale Aonb, http://www.nidderdaleaonb.org.uk Paryatmo, W. (2007). Turbin Air, Graha Ilmu, Yogyakarta. Rorres, C. (1998). The Turn of the Screw: Optimal Design of An Archimedes Screw, Journal of Hydraulic Engineering, Philadelphia. Senior, J., Wiemann, P., Muller, G. (2010). The Rotary Hydraulic Pressure Machine for Very Low Head Hydropower Sites, Journal of Civil Engineering Department, University of Southampton, U.K. Sularso & Suga, K. (1985). Dasar Perencanaan dan Pemilihan Elemen Mesin, PT Pradnya Paramita, Jakarta. | en_US |
| dc.description.abstract | A renewable energy source for mini / micro hydro usually exploits the potential energy of water flow that have certain head
and the specific discharge which is converted into electrical energy through a turbine and generator. However, in many rivers,
the average of water resource potential has a large discharge and low head. Thus, the development of a low head turbine or a
very low head is very suitable to be developed in Indonesia. Screw turbine uses low head and high flow rate of water to
generate torque and rotation as mechanic energy. Screw turbine has many advantages such as simple in construction and
installation, low cost in operating and maintenance, and fish-friendly. The influencing parameters to mechanics performance
of screw turbine are pitch distance, water discharge and the shaft slope. The objective of this research is to investigate the
effect of shaft slope angle and discharge variations to mechanics performance of a 2-blades screw turbine in laboratory scale.
A model used in the research was a 2-blades screw turbine, pitch (distance of a screw wave) is 1.6 Ro, external radius (Ro) is
0.1419 m, and internal radius (Ri) is 0.0762 m. The screw turbine was tested in Hydraulic Laboratory of the Vocational
School of Civil Engineering, Gadjah Mada University, with various average discharges of water was about 0.00364 m3/s to
0.00684 m3/s, and the angle of turbine shaft slope was from 25°to50°. The result of the testing showed that the discharge and
turbine shaft slope affected the turbine power and efficiency. The highest turbine power and efficiency were produced at
average discharge was 0.00684 m3/s. The optimum screw turbine shaft slope was 35o, indicated by the output power of screw
turbine of 16.231 watt and the efficiency of 61.61%. | en_US |
