| dc.identifier.citation | Abdillah, F. 2013. Analisis Postur Kerja dengan Metode Rapid Upper Limb Assessment (RULA) pada Pekerja Kuli Angkut Buah di Agen Ridho Illahi Pasar Johar Kota Semarang. Jurnal Kesehatan Masyarakat FKM Undip. Vol. 2, No. 1, January 2013, pp. 1-10. Albugis, D. Y. 2009. Analisis Risiko Musculoskeletal Disorders (MSDs) Menggunakan Metode Rapid Entire Body Assessment (REBA) di Workshop Steel Tower PT. Bukaka Teknik Utama. Skripsi. Departemen Keselamatan dan Kesehatan Kerja, Fakultas Kesehatan Masyarakat, Universitas Indonesia, Depok. Budiman, E.; and R. Setyaningrum. 2006. Perbandingan Metode-metode Biomekanika untuk Menganalisis Postur pada Aktivitas Manual Material Handling (MMH). Jurnal Teknik Industri Undip. Vol. 1, No. 3, September 2006, pp. 46-52. Dempsey, P.G.; R.W. McGorry; and W.S. Maynard. 2005. A Survey of Tools and Methods Used by Certified Professional Ergonomists. Applied Ergonomics, Vol. 36, No. 4, January 2005, pp. 489-503. Desky, H. A. L. 2010. Analisis Postur Kerja Ditinjau dari Segi Ergonomi di Bagian Pengemasan pada PT. Kimia Farma (Persero) Tbk Plant Medan. Tugas Sarjana, Departemen Teknik Industri, Fakultas Teknik, Universitas Sumatera Utara, Medan. Hignett, S; and L. McAtamney. 2005. REBA and RULA: Whole Body and Upper Limb Rapid Assessment Tools, in W. S. Marras and W. Karwowski (Eds.), Fundamentals and Assessment Tools for Occupational Ergonomics (Pg. 42-1 to 42-12). New York: Taylor & Francis Inc.. McAtamney, L; and E.N. Corlett. 1993. RULA: A Survey Method for The Investigation of Work-Related Upper Limb Disorders. Applied Ergonomics. Vol. 24, No. 2, April 1993, pp. 91-99. Pangaribuan, D. M. 2009. Analisa Postur Kerja dengan Metode RULA pada Pegawai Bagian Pelayanan Perpustakaan USU Medan. Tugas Sarjana, Departemen Teknik Industri, Fakultas Teknik, Universitas Sumatera Utara, Medan. Sartika, U. 2010. Analisis Beban Kerja dengan Metode RULA pada Stasiun Perebusan di Pabrik Kelapa Sawit PT. PP. London Sumatera Indonesia, Tbk. Karya Akhir. Program Studi Teknik Manajemen Pabrik, Fakultas Teknik, Universitas Sumatera Utara, Medan. | en_US |
| dc.description.abstract | Working posture can affect the comfort and productivity of labor in doing manual work. In this study, RULA method is used to determine the risk level of musculoskeletal disorders (MSDs) injury in the production process at PT. Indana Paint (consists of mixing and packaging steps for water-based paint, solvent-based paint, and base paint production), and then given proposed improvements to reduce the risk level. Method used in this research is direct observation and video recording of every work element to determine some awkward postures that will be assessed using RULA method. Thirty awkward postures are found, there are 7 working posture (23.3%) have low risk level, 11 working posture (36.7%) have medium risk level, and 12 working posture (40%) have high risk level. Proposed improvements given is to brief the workers on appropriate lifting technique and working methods, adding mechanical aids for handling drums, and working position height adjustment. | en_US |
