dc.identifier.citation | [1] Taitel, Y., Barnea, D., Dukler, A.E., “Modeling Flow Pattern Transition for Steady Upward Gas-Liquid Flow in Vertical Tubes”, American Institute of Chemical Engineering Journal, 26, pp. 345-354, 1980. [2] Hewitt, G.F., Hall-Taylor, N.S., Annular Two-Phase Flow, Pergamon Press, 1970. [3] Dumitrescu, D.T.Z., “Strömung an EinerLuftblaseimSenkrechten Rohr”, Z. angew. Math. Mech., 23, 139, 1943. [4] Taylor G.S., Davies, R.M., “The mechanics of large bubbles rising through extended liquids and through liquids and through liquids in tube, Proc. R. Soc. London, Ser. A, 200, 375, 1950. [5] Nicklin, D.J., Wilkes, J.O., and Davidson, J.F., 1962, Two-Phase Flow in Vertical Tubes, Trans. Inst. Chem. Engrs, 40, 61. [6] Zukoski, E.E., “Influence of viscosity, surface tension, and inclination angle on motion of long bubbles in closed tubes,” J. Fluid Mech., 25, 821, 1966. [7] Tomiyama, A., Nakahara, Y., Adachi, Y., Hosokawa, S., “Shapes and rising velocities of single bubbles rising through an inner subchannel,” J. Nucl. Sci. Technol., 40, 136, 2003. [8] Krüssenberg, A.-K., Prasser, H.-M., Schaffrath, A., “A new criterion for the bubble slug transition in vertical tubes”, Proceeding of 9th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-9), San Francisco CA, 3–8 October, 1999. [9] Lucas, D., Krepper, E., Prasser, H.-M, “Development of co-current air– water flow in a vertical pipe”, International Journal of Multiphase Flow, 31, pp. 1304–1328, 2005. [10] Prasser, H.-M., Scholz, D., Zippe, C., “Bubble size measurement using wire-mesh sensors”, Flow Measure. Instrument., 12, pp. 299–312, 2001. [11] Van Hout, R., Barnea, D., Shemer, L., “Translational velocities of elongated bubbles in continuous slug flow”, Int. J. Multiphase Flow, 28, pp. 1333-1350, 2002. [12] Fernandes, R.C., Semiat, R., Dukler, A.E., “Hydrodynamic Model for Gas-Liquid Slug Flow in Vertical Tubes”, American Institute of Chemical Engineering Journal, 29, pp. 981-989, 1983. [13] White, E.T., Beardmore, R.H., “The velocity of rise single cylindrical air bubbles through liquid contained in vertical tubes”, Chemical Engineering Sciences, 17, pp. 351-361, 1962. [14] Lucas, D., Krepper, E., “CFD Models for Polydispersed Bubbly Flow”, HZDR Technical Report FZD-486, HZDR-Germany, 2007. [15] Krepper, E., Lucas, D., Frank, T., Prasser, H.-M., Zwart, P.J., “The inhomogeneous MUSIG model for the simulation of polydispersed flow”, Nuclear Engineering and Design, 238, pp. 1690–1702, 2008 [16] Van Hout, R., Barnea, D., Shemer, L., 2001, “Evolution of statistical parameters of gas-liquid slug flow along vertical pipes”, International Journal of Multiphase Flow, 27, pp. 1579-1602, 2001. [17] Mao, Z.S., Dukler, A.E., “An experimental study of gas-liquid slug flow”, Experiments in Fluids, 8, pp. 169-182, 1989. [18] Pinto, AMFR, Campos, JBLM, “Coalescence of two gas slugs rising in a vertical column of liquid”, Chemical Engineering Science, Vol. 51, 1, pp. 45-54, 1996. [19] Pinto, A.M.F.R., Coelho Pinheiro, M.N., Campos, J.B.L.M., “Coalescence of two gas slugs rising in a co-current flowing liquid in vertical tubes”, ChemEngSci, 53, pp. 2973–2983. [20] Shemer, L., Barnea, D., “Visualization of the instantaneous velocity profiles in gas–liquid slug flow”, Physic. Chem. Hydrodyn., vol. 8, pp. 243–253, 1987. [21] Polonsky, S., Barnea, D., Shemer, L., “Averaged and time dependent characteristics of the motion of an elongated bubble in a vertical pipe”, Int. J. Multiphase Flow, vol. 25, pp. 795–812, 1999a. [22] Hampel, U., et al., “Experimental ultrafast X-ray computed tomography with a linearly scanned electron beam source”, Flow Measurement and Instrumentation, 16, pp. 65–72, 2005. [23] Prasser, H.-M., Misawa, M., Tiseanu, I., “Comparison between wiremesh sensor and ultra-fast X-ray tomograph for an air–water flow in a vertical pipe”. Flow Measure. Instrument. 16, 73–83, 2005. [24] Fischer, F., et al., “An Ultrafast Electron Beam X-ray Tomography Scanner”, Measurement in Science and Technology, 19, 2008. [25] Fischer, F., Hampel, U., “Ultrafast Electron Beam X-ray Computerd Tomography for Two-Phase Flow Measurement”, Nuclear Engineering and Design, 240, pp. 2254-2259, 2010. [26] Kak, A. C. and Slaney, M., Principles of computerized tomographic imaging, IEEE Press, 1988. [27] Banowski, M., Lucas, D., Hoppe, D., Beyer, M., Szalinski, L., Hampel, U., “Segmentation of ultrafast x-ray tomographed gas-liquid flows in a vertical pipe at different flow regimes”, Proceeding of 7 World Congress on Industrial Process Tomography, Krakow-Poland, 2013. [28] Patmonoaji, A. “Investigation of gas-bubble velocities from experimental data of ultrafast two-layer electron beam X-ray tomography”, Master Thesis, GadjahMada University, Indonesia, 2014. [29] Patmonoaji, A., Banowski, M., Lucas, D., Deendarlianto, “Investigation of gas-bubble velocities from experimental data of ultrafast two-layer electron beam X-ray tomography”, Proceeding of The 12 Annual National Seminar of Mechanical Engineering (SNTTMXII), Bandar Lampung-Indonesia, pp. 1374-1383, 2013. [30] Bankoff, S. G., “A variable density single-fluid model for two-phase flow with particular reference to steam-water flow”, J. Heat Transfer, 82 (2), pp. 265-270, 1960. [31] Harmathy, T.Z., “Velocity of Large Drops and Bubbles in Media of Infinite or Restricted Extent”, American Institute of Chemical Engineering Journal, 6, 281, 1960. [32] Ahmad, W.R., DeJesus, J.M., Kawaji, M., “Falling film hydrodynamics in slug flow”, Chem. Eng. Sci, 53, pp. 123-130, 1998. [33] Kawaji, M., DeJesus, J.M., Tudose, G., “Investigation of flow structures in vertical slug flow”, Nuclear Engineering and Design, 175, pp. 37-48, 1997. [34] Van Hout, R., Shemer, L., Barnea, D., “Spatial distribution of void fraction within a liquid slug and some other related slug-parameter”, Int. J. Multiphase Flow, 18, pp. 831-845, 1992. [35] Guo-dong, X., Zhen-zhen, C., Qing, L., “A model for liquid slug length distribution in vertical gas-liquid slug flow”, Journal of Hydrodynamics, 21 (4), pp. 491-498, 2009. [36] Kaji, R., Azzopardi, B.J., Lucas, D., “Investigation of flow development of co-current gas–liquid vertical slug flow”, International Journal of Multiphase Flow, 35, pp. 335–348, 2009. [37] Costigan, G., Whalley, P.B., “Slug flow regime identification from dynamic void fraction measurements in vertical air–water flows”, Int. J. Multiphase Flow, 23, pp. 228–263, 1996. [38] Khatib, Z., Richardson, J.F., “Vertical co-current flow of air and shear thinning suspensions of kaolin”, Chem. Eng. Res. Design, 62, pp. 139154, 1984. [39] Moissis, R., Griffith, P., “Entrance effects in a two-phase slug flow”, J. Heat Transfer, 84, pp. 29-39, 1962. [40] Polonsky, S., Shemer, L., Barnea, D., “The relation between the Taylor bubble motion and the velocity field ahead of it”, International Journal of Multiphase Flow, 25, pp. 957-975, 1999b. [41] Mayor, T.S., Ferreira, V., Pinto, A.M.F.R., Campos, J.B.L.M., “Hydrodynamics of gas–liquid slug flow along vertical pipes in turbulent regime – An experimental study”, Int. J. Heat Fluid Flow, 29, pp. 1039-1053, 2008. [42] Shemer, L., “Hydrodynamic and statistical parameters of slug flow”, International Journal of Heat and Fluid Flow 24, pp. 334–344, 2003. [43] Yan, K., Che, D., “Hydrodynamic and mass transfer characteristics of slug flow in a vertical pipe with and without dispersed small bubbles”, International Journal of Multiphase Flow, 37, pp. 299–325, 2011. [44] Zheng, D., Che, D., “Experimental study on hydrodynamic characteristics of upward gas–liquid slug flow”, International Journal of Multiphase Flow, 32, pp. 1191–1218, 2006 [45] Joseph, D. “Rise velocity of a spherical cap bubble”, J. Fluid Mech., 488, pp. 213–223, 2003. | en_US |