| dc.identifier.citation | Adisoemarta, S., (2008), “APRS dan Aplikasinya”, Prosiding SIPTEKGAN XII 2008, pp. 749-757. APRS Working Group, (2000), “APRS Protocol Reference”, Tucson Amateur Packet Radio Corp, pp. 7-93. Beech, W.A., Nielsen, D.E., Taylor, J., (1998), “AX.25 Link Access Protocol for Amateur Packet Radio”, Tucson Amateur Packet Radio Corporation, pp. 2-54. Goeritno, A., Yatim, R., Nugroho, D.J., (2014), “Modifikasi Modem pada Jaringan APRS Untuk Pengiriman dan Penerimaan Data Paket Telemetri”, Prosiding Simposium Nasional RAPI XIII-2014 FT UMS, pp. E-73-E-84. Kantronics, (2007), “MT1200 and MT1200G Users Guide: Introduction, Getting Started, Modes of Operation, Command Reference, and Hardware Specifications”, Kantronics Co. Inc., pp. 19-68. Mororola, (1997), “Motorola Semiconductor Technical Data”, Order this document by MC68HC11FTS/D. Priyanto, I., Suhata, Yatim, R., (2012), “Rancangan Sistem Monitoring Objek Berbasis APRS (Automatic Packet Reporting System) Menggunakan Satelit ISS (International Space Station)”, Prosiding SIPTEKGAN XIV 2012, pp. 543-551. Sunny, Ananti Selaras, (2008), “Automatic Packet Reporting System (APRS), ___, ___ http://ananti.wordpress.com/2008/04/15/ automatic-packet-reporting-system- APRS (diunduh 14 Mei 2014). Suwarjo, M., (2010), “Modifikasi Modem Kantronics KPC-3 untuk Aplikasi pada Sistem APRS”, Buku Ilmiah: Satelit Mikro Untuk Mitigasi Bencana dan Ketahanan Pangan, IPB Press, pp. 97- 110. Thinel, J., (2009), “US Naval Academy Satellite Lab, Bob Bruninga, WB4APR”, US Naval Academy LABsats, pp. 1-10. Wafa, Kahirul, (2008), “APRS, Automatic Packet/Position Reporting System”, ___, ___ http://khairulwafa.wordpress.com/2008/ 04/16/aprs-automatic-packetpositionreporting- system/ (diunduh 14 Mei 2014) | en_US |
| dc.description.abstract | Measurement of performance the Automatic Packet Reporting System (APRS) for
telemetry packet data from monitoring and measurement results have been done,
through the steps in the form of: a) the achievement of handshaking conditions between
transmitter and receiver station in the APRS networks and b) acceptance of telemetry
packet data sets based on sensor’s performance of monitoring and measurement of
physical parameters. The form of the success of the process to send, receive, and
digipeatering of telemetry packet data are the achievement of handshaking conditions
aided HyperTerminal application program on an ongoing basis, namely: (a) when the
transmitting station “YB0LRB-11“ was transmitted telemetry packet data with the
format YB0LRB-11>BEACON,WIDE2-1 [05/18/2014 04:00:49]: <UI>:
T#001,004,035,005,122,075 and (b) when telemetry packets data was received
and sent from receiving station “YB0LRB” or digipeatering process with the format:
YB0LRB-11>BEACON,YD1PRY-2,WIDE2* [05/18/2014 04:00:50]:
<UI>: T#001,004,035,005,122,075. Monitoring sensors was performed very
stable, while the measurement sensor is performing relatively stable because there is
value measurement deviation of 1 cm or have a percentage error of 1.7%. | en_US |
