| dc.identifier.citation | 18 Studi Proses Electrical Discarge Machining dengan Elektroda Tembaga oleh Patna Partono dan Tri Widodo Besar Riyadi Dauw D.F., et al., 1990, Surface topography investigations by fractal analysis of spark eroded electrically conductive ceramics, Ann. CIRP 39 (1) 161–165. Brink D., EDM: Principles of Operation, EDM Technology Transfer. http://www.edmtt.com, diakses tahun 2007. Kahng C.H., Rajurkar K.P., 1977, Surface characteristics behavior due to rough and fine cutting by EDM, Ann. CIRP 26 (1) 77. Soni J.S., Chakraverti G., 1985, Effect of electrode material properties on surface roughness and dimensional accuracy in electro-discharge machining of high carbon high chromium die steel, J. Inst. Eng. (India)–PR 76, 46–51. Soni J.S., Chakraverti G., 1990, Physico-mechanical effect on electrodischarge machined surface of high carbon high chromium die steel, J. Inst. Eng. (India) 71 (PR-1) 19. Soni J.S., Chakraverti G., 1991, Investigative study on metal removal rate and wear ratio in EDM of high carbon high chromium die steel, J.Inst. Eng. (India) 71 (Pt AS2) 32. George V., Venkatesh V.C., 1980, Investigations on optimum machining conditions for electrodischarge machining of 5 Cr die steel, in: Proceedings of the Ninth AIMTDR Conference, IIT, Kanpur, 327 pp. Pandey P.C., Jillani S.T., 1987, Electrical machining characteristics of cemented carbides, Wear 116, 77. Raman K.S., Gupta H.R., Singal A.R., Das P.K., Saha P., Mishra P.K., 1997, EDMing of GT-20 grade of carbide, in: Proceedings of the 17th AIMTDR Conference, REC, Warangal, pp. 290–294. Arthur A., Dickens P.M., Cobb R.C., 1996, Using rapid prototyping to produce electrical discharge machining electrodes, Rapid Prototyping 2 (1) 4–12. Jeswani M.L., 1978, Roughness and wear characteristics of spark eroded surfaces, Wear 51, 227. | en_US |
