Show simple item record

dc.contributor.authorFuadi, Ahmad M.
dc.contributor.authorBrelid, Harald
dc.date.accessioned2017-04-13T05:57:02Z
dc.date.available2017-04-13T05:57:02Z
dc.date.issued2006-10
dc.identifier.citationBasta,J., Holtinger,L., Hook,J., 1991, Controlling the Profile of Metal in the Pulp Before Hydrogen Peroxide Treatment, 6th International Symposium on Wood and Pulping Chemistry Notes, Appita, Parkville, Victoria, Australia, page: 237. Colodete, J.L., Rothenberg, S., and Dence, C.W., 1988, Factor Affecting Hydrogen Peroxide Stability in the Brightening of Mechanical and Chemimechanical Pulp Part II: Hydrogen Peroxide Stability in Presence Sodium Sodium Silicate, Journal Plp and Paper Science, 15(1), J-3-J10. Dence, C.W., Reeve, D.W., 1996, Pulp Bleaching Principle and Practice, Tappi Perss, Atlanta, page:349 - 415. Gierer, J., and Imsgard, F., 1977, Svensk Papperstidn, 80, 16, 510. Jiebing, LI., 1999, Toward an Accurate Determination of Lignin in Chemical Pulps, Royal Institute of Technology, Stockholm, page: 2-5. Juuti S., Vartianinen T.,Joutsenoja P., Ruuskanen J., 1996, Volatile Organochlorine Compounds Formed in The Bleaching of Pulp with ClO2, Chemosphere 33, page: 437 - 438.
dc.identifier.issn0853-2850
dc.identifier.urihttp://hdl.handle.net/11617/8525
dc.description.abstractThe pulping industry has been phasing out chlorine as a bleaching agent and nowadays only a minor part of the production of bleached paper pulp involves the use of chlorine gas. This development has been driven by environmental concerns, because of the formation and emission of chlorinated organic substances that follows the use of chlorine gas in pulp bleaching. The chlorine gas has, to a large extent, been replaced by chlorine dioxide, which generates much lower amounts chlorinated organics than chlorine gas. There are, however, even more environmentally benign bleaching chemicals available, such as hydrogen peroxide. Hydrogen peroxide is nowadays becoming a commonly used bleaching agent in chemical pulp mills. The bleaching efficiency of hydrogen peroxide is, however, dependent on the design of the bleaching sequence in which the peroxide stage is included. In this paper, the importance of a proper chelating stage (treatment with EDTA) prior to peroxide bleaching of eucalyptus kraft pulp is high-lighted. The results show that a high brightness at a high viscosity can be achieved at a relatively low consumption of peroxide, if the bleaching is proceded by a chelation stage. These results are in agreement with results found in the literature. Some results regarding the impact of the alkali addition in the peroxide stage are also included.
dc.language.isoenin_ID
dc.publisherFakultas Teknik Universitas Muhammadiyah Surakartain_ID
dc.subjectKraft pulpin_ID
dc.subjectEucalyptusin_ID
dc.subjectEucalyptus globulusin_ID
dc.subjectPeroxide Bleachingin_ID
dc.subjectChelating Stagein_ID
dc.titleBenefits of a Chelating Stage Prior to Peroxide Bleachingin_ID
dc.typeArticlein_ID


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record