PHYSICAL CHARACTERISTICS AND SHEAR STRENGTH OF CLAY STABILIZED USING LIME AND BAGASSE ASH
View/ Open
Date
2013-03Author
Susanto, Agus
Renaningsih
Puri, Dhamis Tri Ratna
Metadata
Show full item recordAbstract
Based on the research conducted by Wiqoyah (2003), soil in Jono Village, Tanon, Sragen, is
unorganic clay with high plasticity. In the rainy season, the soil becomes soft and its strength is very
weak while in the dry season it becomes hard and cracks due to shrinkage. Therefore, it is necessary
to examine its physical properties and mechanics to make the strength of construction best fit with
the soil properties used as basic building through stabilization. In this study soil is stabilized using
8% lime and bagasse ash with variation of 0%, 3%, 6%, 9%, 12%, and 15% of the weight of the
sample. The test of soil stabilitsation results include a series of tests covering specific gravity, water
content, atterberg limits, sieve analysis, hydrometer, and standard Proctor. The Direct Shear Test
was done with 3 and 7 days of care.The findings show that the soil stabilization based on AASHTO
classification system include the group of A-5, A-2-5 and A-2-4 while based on the USCS
classification, the stabilization results involve the SC and SM. In the soil of stabilization results,
along with the increasing of the percentage of bagasse ash addition the value of specific gravity,
liquid limit, plastic limit, plasticity index and percentage pass sieve 200 tend to decrease, the
shrinkage limit turns to increase. From the standard Proctor test the optimum moisture content tends
to decrease and the dry weight has a tendency to increase. Shear strength values with 3 days and 7
days of care tends to increase along with the addition of bagasse ash. Cohesion and friction angle
values are the highest in the soil sample with 7 days of treatment with the addition of 15% bagasse
ash which amount 0,360 kg/cm
2
and 51,23°.