| dc.contributor.author | Siswanto, M. Fauzie | |
| dc.contributor.author | Priyosulistyo, Priyosulistyo | |
| dc.contributor.author | Priyosulistyo, Priyosulistyo | |
| dc.contributor.author | Prayitno, T.A. | |
| dc.date.accessioned | 2013-06-11T12:13:26Z | |
| dc.date.available | 2013-06-11T12:13:26Z | |
| dc.date.issued | 2012-01 | |
| dc.identifier.citation | Abdurrohim, S. dan Djarwanto. (2000). “Pengawetan Lima Jenis Kayu Bangunan Perumahan Dan Gedung Secara Vakum Tekan Dengan Bahan Pengawet CCB Dan CCF.” Pusat Penelitian Hasil Hutan. Badan Penelitian dan Pengembangan Kehutanan dan Perkebunan. Departemen Kehutanan dan Perkebunan, Bogor. Barly. (1999). “Pengawetan Bambu untuk Bahan Konstruksi Bangunan dan Mebel.” Petunjuk Teknis, Badan Penelitian dan Pengembangan Kehutanan dan Perkebunan, Pusat Penelitian dan Pengembangan Hasil Hutan dan Sosial Ekonomi Kehutanan. Morisco. (1999). Rekayasa Bambu. Nafiri Offset. Yogyakarta. Mursito, A. (2003). “Pengaruh Pengawetan Dengan Metode Perendaman Solar Terhadap Karakteristik Bambu Ampel (Bambusa Vulgaris Schrad).” Skripsi. Fakultas Teknik Jurusan Teknik Sipil Universitas Gadjah Mada. Yogyakarta. Ngurah, G. (2003). “Pengaruh Pengawetan Dengan Metode Perendaman Dingin Menggunakan Prusi Terhadap Karakteristik Bambu Petung.” Skripsi. Fakultas Teknik Jurusan Teknik Sipil Universitas Gadjah Mada. Yogyakarta. Nicholas, D. D. (1988). Kemunduran (Deteriorasi) Kayu dan Pencegahannya Dengan Perlakuan-Perlakuan Pengawetan. Jilid II, Bahan-bahan Pengawet dan Sistem-sistem Pengawetan. Airlangga University Press. Surabaya. Sulthoni, A. (1989). “Bamboo Preservation Project Phase II (Indonesia).” Final Report Vol II: Bamboo Preservation. Faculty of Forestry, Gadjah Mada University. Indonesia. Gopar, M dan Sudiyani,Y. (2004). “Perubahan Sifat Fisik dan Mekanik Panel Zephyr bambu setelah Uji Pelapukan Cuaca.” Jurnal Ilmu & Teknologi Kayu Tropis Vol. 2• No.2• 2004, Mapeki. http://jurnalmapeki.biomateriallipi. org/jurnal/02022004/J.MapekiVol.2No.22004.pdf diunduh 8 Desember 2011 Karlinasari, L. Rachmawati, M, | en_US |
| dc.identifier.issn | 1411- 8904 | |
| dc.identifier.uri | http://hdl.handle.net/11617/3110 | |
| dc.description.abstract | Bamboo has high enough tensile strength. Constrain of use bamboo easily attacked by fungi, termites, beetles and needs
protected weather effects as well as rain and hot sun. The purpose of the study was to determine effect of leaching of presservative
CCB4 to tensile strength are two kinds bamboo. Testing is done with preserving petung and legi bamboo into CCB4
0,%, 5%, 10%, and 15% concentration. Each bamboo is cut into 3 part (base, middle, and end), each testing is done 3 time
repetitions. Bamboo has been preserved placed in free air (leaching process) long 1, 6 and 12 moon, and then it is done tensile
strength test toward parallel of the fibers. Study result show that average tensile strength of bamboo before leaching process is
218.78 MPa, after 6 and 12 moons leaching process is 207 MPa and 198,1 MPa. Decreases of average tensile strength are
5,1% and 9,2% for leaching time 6 and 12 moons, respectively. There are real differences between before and ater leaching
time 6 and 12 moons. | en_US |
| dc.publisher | Universitas Muhammadiyah Surakarta | en_US |
| dc.subject | preservative | en_US |
| dc.subject | tensile strength | en_US |
| dc.subject | bamboo | en_US |
| dc.title | Effect Of CCB4 Preservative Leaching Againts Tensile Strength Are Two Types Bamboo | en_US |
| dc.title.alternative | Pengaruh Leaching Bahan Pengawet CCB4 Terhadap Kuat Tarik Dua Jenis Bambu | en_US |
| dc.type | Article | en_US |
