Volume 18 No. 2, Oktober 2007
Browse by
Recent Submissions
-
OBSERVATIONS OF THE INSTANTANEOUS NEARBED STREAMWISE FLOW VELOCITIES IN CONSTANT FLOWRATES
(2007-10)Seven series of laboratory experiments were carried out in a re-circulating glass sided tilting flume to investigate the instantaneous nearbed streamwise flow velocities in different duration of constant flowrates. Each ... -
VIBRATION ANALYSIS OF DYNAMIC MODELLING OF GEAR PAIR IN MESH DUE TO TORQUE AND LOAD ON THE SYSTEM
(2007-10)This paper presents dynamics modeling of gear pair in mesh. State space analysis and MATLAB operation are used to obtain natural frequencies and graphs of motion on the system. Torque load are applied to analysis numerical ... -
GLUE INFILTRATION OF FREEFORM FABRICATION PRODUCT OF CAST IRON-PE/SILICA-PE COMPOSITE
(2007-10)Due to the pressure-less sintering process, products of the SFF are commonly weak so that the strengthening process is needed. This paper reports a SFF product strengthening method with glue infiltration. Material of ... -
CONVERGENCE STUDY OF BOUNDARY ELEMENT METHOD FOR REISSNER PLATE WITH MATERIAL NONLINEARITY
(2007-10)In this paper, a convergence study of shear deformable plates with material nonlinearity is presented. The reasons behind this study are due to some contribution made in this work. The material is assumed to undergo ... -
ADDITION OF COLD ASPHALT MIXTURE STABILITY USING CEMENT FILLER
(2007-10)The objectives of this research are (1) To know the influence of usage of filler cement to optimum water content at the time of mixing and compaction of cold asphalt mixture.(2)To know the influence of usage of filler ... -
URBAN SPACE MORPHOLOGY AND TYPOLOGY OF THE CITY OF SOLO IN THE EARLY PERIOD (1500-1750)
(2007-10)The objective of this study is to find out the form and the type of urban space in the early of Solo, one of the oldest cities in Java. The object of study was approached by rationalistic research. The method of research ... -
STUDY OF STREAMLINE AND EDDY CURRENT BEHAVIOR IN SUDDEN ENLARGEMENT CIRCULAR PIPE
(2007-10)The steady and unsteady flow through sudden enlargement circular pipe was studied experimentally and computionally both in one and two-phase flows. In this paper, the CAD model of Computational Fluid Dynamic method ... -
MAPPING DEFORMATION BY PHOTONIC GUIDED-PATH TOMOGRAPHY
(2007-10)Deformation measurement systems are very important in the field of health monitoring of structures in a range of engineering industries including the aerospace, civil, automotive, and marine sector. Recently, the trend ... -
FIRE RESISTANCE OF FLY ASH - POLYESTER GEOPOLYMER COMPOSITE
(2007-10)The development of PLTU using coal in Indonesia results the increasing of fly ash waste. The waste should be used carefully to eliminate environment pollution. The objective of this research is to investigate the fire ... -
ANTI-WINDUP CONTROLLER PARAMETERIZATIONS
(2007-10)Following a linear controller design, an anti-windup compensation is a popular approach that may be taken to deal with input saturation. There have been many anti-windup techniques proposed. Based on a transfer function ...
RSS 1.0