Show simple item record

dc.contributor.authorAnggono, Agus Dwi
dc.contributor.authorDarmawan, Agung Setyo
dc.contributor.authorSantoso, Budi
dc.date.accessioned2016-10-21T09:40:01Z
dc.date.available2016-10-21T09:40:01Z
dc.date.issued2016-08-27
dc.identifier.citationAnggono, A.D. & Riyadi, T.W.B., 2014. Finite Element Simulation of the Drawability of Tailor-Welded Blank. Applied Mechanics and Materials, 660, pp.3–7. Available at: http://www.scientific.net/AMM.660.3. Anggono, A.D. & Siswanto, W.A., 2013. Simulation of Ironing Process for Earring Reduction in Sheet Metal Forming. Applied Mechanics and Materials, 465-466, pp.91–95. Available at: http://www.scopus.com/inward/record. url?eid=2-s2.0- 84891956604&partnerID=tZOtx3y1. Mole, N., Cafuta, G. & Stok, B., 2014. Journal of Materials Processing Technology A 3D forming tool optimisation method considering springback and thinning compensation. , 214, pp.1673–1685. Srirat, J., Kitayama, S. & Yamazaki, K., 2012. Simultaneous Optimization of Variable Blank Holder Force Trajectory and Tools Motion in Deep Drawing via Sequential Approximate Optimization. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 6(7), pp.1081–1092. Available at: http://www.scopus.com/inward/record. url?eid=2-s2.0- 84867267344&partnerID=40&md5=89 487f2ac7b99aadbd02e801398dbe36. Zein, H., Sherbiny, M. El & El, M., 2014. Thinning and spring back prediction of sheet metal in the deep drawing process. Materials and Design, 53, pp.797–808. Available at: http://dx.doi.org/10.1016/j.matdes.2013 .07.078.in_ID
dc.identifier.issn2407-9189
dc.identifier.urihttp://hdl.handle.net/11617/7753
dc.description.abstractBlank is a very important part in the cup drawing process and influential in preventing the wrinkling defect. One type of blanks is tailor blanks (TBs). TBs is a flat sheet metal with a joinning zone. The joinning can be conducted by using welding or seam joining. Related to the joining types, the research is carried out by varying the joining i.e spot welding and seam joining.The research was started by manufacturing of dies with the dimensions parameters adopted from Numisheet 2014 Benchmark Model 4. Fathermore, making a blank is conducted by using spot welding and seam joint. There are three types specimens for experimental work. The sheep plate thickness was 0.2 mm. The results shows that the highest wrinkling defect was 1.5 mm hight for the specimen TBs with spot welding. While, the lowest wrinkling defect was 0.38 mm for the original blank sheet without joining. The specimen with seam joining was fail on the joining zone during cup drawing.in_ID
dc.language.isoidin_ID
dc.publisherSTIKES Muhammadiyah Pekajanganin_ID
dc.subjectTailor blanksin_ID
dc.subjectspot weldingin_ID
dc.subjectseam jointin_ID
dc.subjectcup drawingin_ID
dc.subjectwrinklingin_ID
dc.titlePengaruh Jenis Sambungan Pelat Terhadap Terjadinya Cacat Kerut Pada Proses Cup Drawingin_ID
dc.typeArticlein_ID


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record